Three Equipment Upgrades Hack To Increase Productivity of Old Loading Dock Facilities in New Orleans

Hydraul Technology Conversion Kit

The loading dock in New Orleans is the heart of your facility. It’s where loads of valuable products are prepared for shipment and packed into trucks. Sometimes the loading dock gets bogged down with too much traffic or too little attention to employee safety. Loading and unloading freight plays a crucial part in the overall transportation process. Inefficient dock procedures can lead to higher transportation costs, slower delivery times and customer dissatisfaction. It doesn’t matter the volume of freight you ship, efficiency at your facility is a top priority.

Safety statistics are a dramatic way to get people’s attention to help them understand the connection between a facility’s safety efforts, loading dock equipment, and return on investment when specifying equipment for a project. Here are three equipment upgrades hack to increase the productivity of old loading dock facilities in New Orleans from Overhead Door Company of New Orleans A Division of DuraSErv Corp. and help you get your product in and out of your facility quickly and safely. 

1. APS Air Bag Conversion Kit

The patented ATC Air Technology Conversion Kit will extend the life of your old dock leveler and make it more efficient while lowering your operating costs.

The ATC Kit converts levelers of most major manufacturers and can be installed easily. Plus ATC’s technology is proven safe. The airbag lifting module is made of tough, PVC-coated polyester fibers that operate without loss of performance in temperatures from -65F to +200F, even if the bag is punctured. Standard features include push-button station, high visibility maintenance strut, low-pressure fan motor, removable lifting bag assembly, and lip extension mechanism.

ATC Features and Benefits

  • Easy push-button operation is user-friendly
  • Simple design for ease of operation and low maintenance
  • Ergonomic design increases safety and productivity
  • Proven technology–tested fully effective at over 200,000 cycles w Climate-proof
  • Environmentally friendly
  • Lowest lifetime ownership cost
  • Full-range telescoping toe guards (if not already installed)
  • Secondary OSHA yellow maintenance strut
  • 110 Single Phase

2. APS Flexback Panel

The FLEX-BACK™ Panel is the answer to common lower door panel damage, which is one of the most frequent and costly maintenance problems in today’s busy warehouses. The FLEX-BACK panel is constructed of a high impact polymer skin and flexible tube frame which allows the panel to flex upon impact and return to its normal operating position. This durability helps reduce door maintenance costs and helps eliminate damage to bottom door panels. The FLEX-BACK uses standard door hardware and replaces most standard sectional door panels easily. The insulated panel also provides an exceptional thermal seal to save on energy costs.

Design Highlights

  • Flexible fiberglass frame gives panel durability
  • Help reduce door maintenance costs
  • Provides an exceptional thermal seal
  • Installs easily using standard door hardware
  • Heavy-duty, the easy-grip handle comes standard
  • Available in most popular sectional door sizes: 8’2”, 9’2” and 10’2”
  • Thick, 1¾” construction fits most common doors

3. APS Hydraulic Conversion Kit

Upgrade Your Leveler to Proven Hydraulic Technology

Easy-to-operate, fully hydraulic activation is now available in a conversion kit! Say goodbye to low productivity caused by operating mechanical levelers.

HTC Features

  • 1 horsepower motor/pump assembly
  • Hydraulic main cylinder and lip cylinder with all necessary hoses, fittings, and brackets
  • Easy-to-use constant pressure push-button control
  • Velocity fuse emergency safety system
  • Full range telescoping toe guards
  • Secondary OSHA yellow maintenance strut
  • Both single (110/230 VAC) and three-phase (208-230/480 VAC)

All efforts at improving loading dock equipment in New Orleans efficiency should focus on reducing the time and labor involved in getting shipments processed. The faster a shipment happens, the greater the return on revenue and customer relations. Excellent load sequencing takes concentrated effort and strategic planning. Efficient material handling is a core company competency and a mark of professionalism.

The best efficiency you can get on your loading dock is to integrate all the material handling and safety products that Overhead Door Company of New Orleans provides. Efficiency comes with combining the features and benefits of all sorts of tools and protective devices. Consider your overall efficiency picture when you invest in all of these loading dock upgrades

Overhead Door Company of New Orleans strives to make workplaces like loading docks safe, secure and efficient. We work with you to find solutions for loading dock efficiency as well as equip you with the best quality and value in industrial investments. With our fleet of fully stocked vehicles and a team of factory-trained service technicians, we work around the clock to keep your loading dock equipment operating safely and efficiently. Call 504-822-0345.

Benefits of Using Commercial HVLS Fans in Your Warehouse in Austin, Texas

Serco Atech HVLS Fans

The fast growth of manufacturing and industrial facilities in Austin, Texas is incomparable. The loading docks in these facilities are utilizing the high-end equipment to efficiently undertake the regular storage of goods and their subsequent transfer and transport from one facility to another. 

To manually perform the daily business tasks in the facilities is deemed an inefficient and dangerous undertaking where a high risk of accident occurrence is always present. To this essence, the installation of the loading dock system has been introduced to serve as the loading dock solutions and advocate business proficiency.

With the use of the loading dock system, the productivity of the manufacturing and industrial facilities increases to a remarkable degree. The system includes the overhead roll-up steel door, hydraulic loading dock leveler, loading dock shelter and seals, and loading dock barriers. This set of equipment is installed to ensure the loading dock safety and loading dock efficiency.

The internal temperature of the manufacturing and industrial facilities are desired to be controlled to secure the freshness of the perishable goods and to ensure a workable environment for the workers to increase productivity. However, the use of several big motors or horsepower air conditioning units is indispensable to be provided. 

As a result and apart from the subsequent increase in electricity consumption, the indoor temperature is not actually routinely regulated because the cold breeze may only cover some areas of the storage area but not the entire facility. 

To address the problem, the utilization of industrial fans is highly advised to be undertaken. The only issue left would be the concern of the facility owner as to what kind of fan should be purchased and is fit to be installed that may deliver the required target outcome. 

The suitable commercial fans for the manufacturing and industrial facilities are those that are categorized as industrial fans, which are engineered to be durable equipment to this type of facility. 

That being said, the Serco Industrial HVLS fans are considered as the suitable and relevant equipment designed to distribute the cold air breeze equality to all the corners of the facility. This product is proficient and effective equipment of Overhead Door Company of Austin, a division of DuraServ Corp.

If you have a commercial dock, we also have the right loading dock products and personnel to keep your dock safe and efficient. 

We can provide you with the services you need with the utmost competence whether you opt to retrofit, upgrade or design a new building. Our expert personnel can work with your expert personnel to find the right products and thereafter install it professionally through the help of our well-trained technicians. We will ensure that safety for both the goods and workers are observed. 

Serco Industrial HVLS industrial fans are engineered to distribute a lot of air on top of the other capabilities. With an airfoil style five-blade design, these high-volume low-speed fans work hard to circulate efficiency and positively impact many factors within your manufacturing and industrial facilities. With the high technology attributes of the fans, they distribute the air evenly on the floor and ceiling. 

The installation of the HVLS fans is a cost-efficient resolution that maintains and sustains a steady temperature and may subsequently reduce the moisture in the air, keeping your floors drier and safer. 

To provide you with the complete HVLS fan features, the following are design highlights of Serco Industrial HVLS Industrial Fans:

  • The patent-pending five-blade design optimizes airflow by increasing lift off of the blade surface.
  • Remote digital touchscreen offers floor-level diagnostics.
  • Single-axis mount decreases potential fan movement.
  • Easily integrates with fire suppression panels and iFAN centralized control.
  • In the colder months, HVLS ceiling fans can be run in reverse to circulate hot air that becomes trapped at the ceiling level

For your needs about Austin, Texas Loading Dock Products, Loading Dock Equipment in Austin, Texas, Industrial Fans in Austin, Texas, Serco ATEC HVLS Fans in Austin, Texas and Austin Texas Kelley ATEC HVLS Fans, you may visit our official website to learn more at

You may also call us at (512) 442-1561 for prompt response to any questions. You may also send us your service request at this webpage

Our courteous personnel awaits your call for us to extend our high-quality product and efficient service on the industrial fan installation for your utmost satisfaction. 

What are the Different Kinds of Loading Docks in Texas?

Our loading docks are considered to be one of the busiest parts of the business hub with the area always brimming with activities. With our workforce frequently loading and unloading various items and materials to and from different delivery vehicles, efficiency and safety is key to keeping everything under control.

But how are loading docks important and how can they increase productivity in our workplace? Our loading docks are the center of receiving and transferring the goods to and from our delivery trucks, so choosing the right kind of loading dock design saves us time by helping us get the items to their destinations faster without much hassle and less cost.  It also increases safety and efficiency in the overall workplace. 

However, solely having a loading dock is not good enough for business owners. They also have to make sure that they have the right kind of loading dock design and equipment that meets their business needs. 

How can you choose the right loading dock and what are the different kinds of loading docks? There are several factors to consider when choosing and/or designing a loading dock for commercial spaces. One has to take into consideration not only the kind of dock doors that would be most suitable for their warehouses but also the right dock shelter, safety equipment to put in place and the overall design. From roll-up doors and high-performance doors, business owners have certain selections to choose from for their dock door and frame designs and door solutions. They can also choose among the different safety equipment that companies have available. 

Southern Dock Products,   the best company in the loading dock industry, have everything from different dock levelers to various safety equipment like lighting and truck restraints. Business owners can also choose to be more environmentally conscious and be more cost-effective by choosing items that are energy-efficient among the energy-saving after products the company offers.

So what are the different kinds of loading docks and how to determine what is most suitable for your business? The most common type of loading docks is the following: enclosed loading docks, flush loading dock, open loading dock, and the sawtooth loading dock.

An enclosed loading dock design allows the entire truck to park inside when loading and unloading goods. This design requires its own ventilation systems to get rid of the truck exhaust fume and pollution caused and produced by the trucks inside the building. This design is ideal for when product protection from elements and security of the products is the top priority. This design, however, is the most expensive is since it requires investment initially and maintenance. It also takes a lot of space for when the delivery vehicles park inside.

Flush loading docks are the most common type of loading docks. This dock requires little space since it just serves as an opening flush with the outside wall of the building and has the same foundation as the wall, allowing for trucks to smoothly attach itself to the dock. 

Open loading docks designs, as what the name entails, is an open loading dock on the other hand that doesn’t have any enclosure to surround the truck. This results in items being exposed to the elements and zero climate control for it is hard to heat and cool an open area efficiently. The design is also vulnerable to theft since it doesn’t provide adequate protection to the items, neither to the materials nor the workforce.

For warehouses that have limited maneuvering space outside, the sawtooth loading dock is usually the solution. The design allows trucks to park in an angle without using much space outside since the delivery vehicles are already lined up in the direction of the driveway. This design however also limits the use of dock space inside for the staging area between docks is usually not useable.

Loading dock designs should always be analyzed thoroughly. The kind of trucks that come and go, the items that are to be loaded and unloaded, different safety equipment that has to be put up, all of this should be considered. Business owners have to think about what their specific business needs and has to discuss it with a professional to help them design the perfect loading dock for their business.

For quality loading dock products and loading dock equipment in Texas, Southern Dock Products is the best company to call. Contact us today at 1-800-994-2361 or visit our website at for more details. For service requests, visit

Wayne Dalton – FireStar 700 Rolling Steel Fire Door an Innovative Solution for Fire Protection of Commercial Facilities in Sterling, VA

Wayne Dalton - FireStar 700

Safety is an essential part of living, for it is a state of not being able to get harmed by unexpected circumstances, however, a lot of people do not consider safety.    

Accidents by fire may seldom be a cause for injuries, but injuries leave permanent marks on the person, places or establishments. Damage it may cause is much more expensive than that of safety measures. Would you like to spend more than what you can afford? For example, a warehouse full of ignitable or paper materials, your storage must contain safety features against fire attracting weather and protects storage while maintaining its thermal integrity. 

Likewise or commercial establishmentsbusinesses with rolling steel doors are manageable not just by its feature in which you can install rolling steel doors with large structural openings so that the transfer of materials, to your storage can be easier, but also designed as weather-resistant, and fire protection safety.

For over 60 years, Wayne-Dalton flourishes their expertise in designing a residential and commercial garage door that started from building wooden doors from parts being made in Wisconsin. 

Over the next several years, the company expanded and added more products to its line, including steel commercial rolling doorshigher energy-efficient insulated garage doors, and the invention of Thermo span doors, which propelled the company ahead of its competition. From custom wood to classic steel to carriage house to designer fiberglass, they have garage doors to suit every style of home and budget, plus tons of color to choose from, window, and decorative hardware options to truly customize it as your own.  

Now the innovation still continues and they have formulated a rolling door that answers a “How to protect your properties from any forms of weather damage situation”.

Realizing the global climate change, especially in Sterling, VA’s climates, as characterized by hot and humid summers which also can attract natural fire when unacknowledged, Wayne-Dalton has the solution. 

Unlike any other commercial rolling steel doors, Wayne-Dalton Firestar Rolling Steel Fire Doors provide a practical and innovative solution to safety and fire protection.  

When it comes to its safety, Firestar rolling doors can be drop tested easily and reset in a matter of seconds at any time. And it guarantees you that it is user-friendly and resetting would not require a technician to help and would function well in case of events of the fire. 

When it comes to Wayne-Dalton’s Firestar Rolling Steel Fire Doors, reliability, these doors were tested and approved for a minimum of 20, 000 cycles to meet the requirements of famous agencies such as Underwriters Laboratories and Factory Mutual and to conform to NFPA Standard 80. Wayne-Dalton incorporates one standardized component design for all FireStar Rolling doors that regardless of its size, these doors utilize few parts than other models. It reduces also the chance of having a possibility of potential help from technicians in the future.  

Wayne Dalton – FireStar 700 Rolling Steel Fire Door

Key Features: ·         

  • Planetary Gear Design: Approved and Tested
  • Cycles (Planetary Gear Design): 20,000 cycles (Min.)
  • Technology: Viscous Governor
  • Mechanism: Preassembled(Drop-out)
  • Cable Routing: Single Fusible Link
  • Motor: Chain Hoist/Lift Up or Crank Operation
  • Standardized Component Design: All Door(Sizes)
  • Available: Left-hand or right-hand operation
  • Approved: UL / FM approved
  • Smoke Control/Draft Package: SmokeTite® UL labeled

To know more about Wayne Dalton FireStar door, or any of our rolling steel fire doors, please call Just-Rite Equipment  at  Sterling, VA (703) 450-2800, Baltimore, MD (410) 536-0505 and Jamesburg, NJ (609) 448-6550, you can inquire about our rolling steel fire door Sterling VA, rolling steel fire door Baltimore MD, and rolling steel fire door Jamesburg NJ.

Make that service request now at, or directly contact us through our website at

You can also visit personally our Service Area Offices at Sterling, Virginia; Baltimore, Maryland; and Jamesburg, New Jersey.

Dynaco Streamline Door Best for Manufacturing, Production Areas and Distribution Industry in Tampa, FL

The installation of the high-speed commercial door in the manufacturing, production areas and distribution industry in Tampa, Florida are needed to effectively increase the productivity of your facilities.

This commercial door plays a very important role in the delivery of the effective performance of the facilities to support their regular functions as it is deemed an integral part of the operation. With this integration, careful consideration for the type of commercial door is vital to be undertaken to ensure the production of quality performance and efficient service delivery.  

The installation of the high-speed commercial door provides for the continuous passage of the forklift and the workers during the transfer of the goods for storage or distribution. To complement the best attributes of the door, it would be wise to make sure that it also possesses the qualities for safety that is essential to increase the level of productivity of the workers.  

Further, this door should significantly reduce the operating costs of the facility owners by maintaining an energy-efficient facility door with a noise reduction feature to hamper the noise pollution. 

One of the highlighted issues, when a commercial door is not really designed to engage to a top speed function, is its inability to facilitate efficient congestion of traffic to both the delivery of goods and the transfer of equipment. However, once a high-quality and high-speed door is set up, it will systematically reduce the pertinent traffic delay. 

To make sure that the right product is installed to your manufacturing, production areas and distribution industry in Tampa, FL, you need to avail the services of the professional company with a high-end product.  

American Roll-Up Door Company, a Division of DuraServ has been providing a wide array of manufacturing and distribution facility door products and their efficient installations since 1981. As a matter of fact, we provide everything you need in terms of dock needs. 

Since the manufacturing, warehouse and distribution facilities accommodate massive and heavy traffic on a daily basis on the transfer of goods, a high-quality and efficient door products are needed to be installed. To this end, we highly recommend the Dynaco the Streamline door

Dynaco the Streamline door has an electronic attribute that is being powered by a sensor, which facilitates the efficient door closing and opening features. This prompt response of the door effected by the sensor promotes safety to both the vehicles and workers as it detects the presence of any objects that automatically keep the door open as not to harm any obstruction may it be a person, goods or vehicle.  

A wireless detection sensor system has been integrated into the bottom portion of the door together with the receiver and control box. The open-loop principle has been adopted by the system that when an obstacle is being encountered, the transmitter promptly sends a signal to open the door. This will be one of your most proficient decisions to be made to proficiently provide the best products for the utmost satisfaction. 

But when nothing seems to obstruct the door frame, it automatically closes to regulate the temperature inside the facility. This attribute has been designed to provide a cost-effective system to combat the high energy cost of the electricity.  

For your needs about Dynaco streamline, streamline door, high-performance door, high-speed door, Dynaco streamline Tampa FL, Dynaco streamline Jacksonville FL, and Dynaco streamline Orlando FL, you may visit our official website to learn more at You may likewise give us a call at the following telephone numbers for your queries:

Moreover, you may reach us via our webpage at and you may send your service request through this page Our service areas are regularly open for business to provide you with the utmost client satisfaction at Jacksonville, Orlando, and Tampa FLContact us now and we’ll be happy to serve you better.

For Moderate Commercial Applications Install Wayne Dalton – Model 2411 Steel Sectional Door in Toronto, Canada

Wayne Dalton - Model 2411 Steel Sectional Door

Our doors in our loading docks are as important as the rest of the components that make up the whole loading dock design. These doors provide protection to our loading docks against the elements and increase security in our warehouses.  At  The Bestdoor Companya division of Duraserv Canada, we don’t only offer loading dock equipment but also a variety of premium, top quality doors from different types of sectional doors to various rolling steel doors to high-performance doors

Our steel sectional doors are one of our most in-demand products. But why choose steel sectional doors for your loading docks? Sectional doors are designed to save space since it is usually made for compact operations. When the door opens and rises vertically, they are suspended in the ceiling so you don’t need to worry about the additional space the loading dock door will possibly consume. You can use all the valuable space inside for storage and for added maneuvering space for your forklifts. 

Repairs are affordable. A sectional door is usually made of three to eight panels so when one panel is damaged, the damaged panel can easily be replaced without worrying about damaging the others making repairs much more affordable.  

Sectional doors are also reliable and are known for their strength. Each panel is attached to the main door track making it safe to open and close, unlike the standard tilt door that only has a few connections, resulting in it going off track much more quickly and easily.  

You are secured with sectional doors. Sectional doors have solid, sturdy structures and have minimum rotation points that make it almost impossible to break into. It can provide maximum security for warehouses against theft and uninvited guests.  

A variety of designs is available. You don’t have to worry about making your warehouses look stuffy and unattractive. Various designs are available for you to choose from. At The BestDoor Company, we have a different range of colors, styles, and materials available that make it easy for you to look for the kind of sectional door that suits your taste. 

Why choose the steel sectional door?

A steel door is worth it. Steel doors last longer than other natural materials and require less general maintenance. If the steel door is galvanized, it will not rust or rot saving you money on the maintenance that other kinds of doors require. Steel doors can also be painted and are versatile when it comes to molding and stamping it to preferred shapes. You can style it according to what you like and you don’t have to maintain it as frequently.  As its name indicates, a steel door is also durable. This is the kind of door that can withstand forces and attacks, even fire.  

So why should you install The BestDoor Company’s Wayne Dalton – Model 2411 Steel Sectional Door you ask?

This Wayne Dalton sectional door is affordable while still providing you with optimum strength and protection. This commercial sectional steel door is designed to enhance the building’s facade by having an embossed exterior skin with a stucco finish. It also has C-shaped vertical stiles that provide additional strength with quick and secure hinge attachment. 

 To make sure that Wayne Dalton – Model 2411 Steel Sectional Door of The BestDoor Company is of utmost quality, it is made with 24-gauge ribbed steel sections, the most ideal for top quality, commercial-grade doors. It also has a galvanized steel retainer which is hot-dipped and roll-formed holding up a vinyl bulb-shaped astragal in its bottom section. 

This steel sectional door made available by The BestDoor Company in Ontario, Canada has lite options including insulated or non-insulated factory-installed vision lights or aluminum full-view sections for maximum visibility. This commercial steel sectional door has all the useful features that remind us why steel sectional doors remain as one of the best kinds of doors for our loading docks. 

Why choose The BestDoor Company for your loading dock doors needs? We have a team of fully trained and certified technicians that have been servicing areas from Concord, Mississauga, Brampton and Vaughan to Hamilton, Markham and Scarborough of the province of Ontario, Canada for more than 35 years now. We are the most trusted and the largest distributor of the leading manufacturers of dock equipment and hi-speed doors. Here is the company that has your best interest at heart and your ultimate satisfaction as their top priority. Call us now at 647-952-2188 or send us a message at You can also visit our website for more details.